Detailed overview
The changes in dimensions caused by the changes in the standards are shown below. For the sake of clarity, the changed values are emphasized. All data in mm.
Hexagon head screws and nuts
New key sizes for
DIN 439, 557, 562, 917, 931, 933, 934, 935, 979, 980, 982, 985, 986, 1587, 6330, 6331, 6923 ISO 4014, 4017, 4032, 4035, 4161, 7040, 7042, 8673, 8675, 10511 EN 1661
"e"-corner
The changed key sizes means that the corner width "e" has also changed
Nut height changes
Hexagon thin nuts (regular thread ) DIN 439 - ISO 4035: no alterations
Hexagon nuts DIN 934 - ISO 4032/8673
- = dimensions not defined in relevant standard
Prevailing torque type hexagon nuts, low type DIN 980 - ISO 7042
Prevailing torque type hexagon nuts, non-metallic insert DIN 982 - ISO 7040
Prevailing torque type hexagon nuts, low type DIN 985 - ISO 10511
Metric and tapping screws
Changed head dimensions for
Slotted cheese head screws ISO 1207 - DIN 84
Tapping screws with hexagon head ISO 1479 - DIN 7976
- = dimensions not defined in relevant standard
Slotted pan head screws
Metric screws ISO 1580 - DIN 85
Tapping screws ISO 1481 - DIN 7971
Cross recessed pan head screws
Metric screws ISO 7045, 14583 - DIN 7985
Tapping screws ISO 7049 - DIN 7981
- = dimensions not defined in relevant standard
Cross recessed and slotted pan head screws
Metric screws ISO 2009, 2010, 7046, 7047 - DIN 963, 964, 965, 966
Tapping screws ISO 1482, 1483, 7050, 7051 - DIN 7972, 7973, 7982, 7983
Socket countersunk screws
Countersunk screws ISO 10642 - DIN 7991
- = dimensions not defined in relevant standard
